Garmin GTX 330ES

gtx330 270x200Surveillance for Busy Airspace

  • IFR-certified 250 W transponder
  • Optional 1090 MHz ES broadcast technology
  • Easy-to-read LCD display
  • Traffic Information System (TIS-A) alerts on compatible displays
  • Pressure altitude, dedicated VFR squawk button and more

A panel-mounted Mode S digital transponder series with traffic datalink capability and dedicated pushbutton keys for squawk code selection, the GTX 330 family brings ATC aircraft surveillance to new levels of precision, reliability and performance.

Leading the Way to ADS-B with Optional ES Upgrade

Optionally available with available ES, or Extended Squitter, technology the GTX 330 takes the lead in providing an affordable pathway to ADS-B compliance for the Next Generation airspace system. Using precise GPS-referenced positioning information, the extended squitter technology enables transponders to automatically transmit more accurate, and more useful, traffic surveillance data — including aircraft flight ID, position, altitude, velocity, climb/descent, and heading information. (Compared to traditional Mode S and Mode C transponders, which can only broadcast altitude, and thus require ground-based radar to correlate and identify the aircraft’s position.)

Traffic in Simulcast

Certified to TSO-C166b authorization for 1090 MHz extended squitter transmission, the ES upgrade improves upon the existing transponder query system while working seamlessly with existing ATC protocols. The ADS-B reports provide ground controllers with considerably faster updates than traditional radar. And by simultaneously broadcasting this information to TAS or TCAS equipped aircraft, it enables them to essentially see the same traffic picture for their location that ATC is watching on the ground. Thus, with everyone in the ADS-B loop watching and reacting to the same flight trajectories, safe separation is far easier to maintain.

Quality Shows Through

All the features of the standard GTX 330 transponder are retained in the ES version: Solid-state design, 250-watt transmitter, remote ident and auto standby, altitude monitor with voice alerts, TIS-A traffic interface, and an easy-to-read LCD display that reverses its numbers out of black for optimal viewing in all lighting conditions. A dedicated VFR squawk code button makes entering the numbers quick and easy. And a variety of useful timing and display functions include flight time, count-up and count-down timers, plus current pressure altitude. The GTX 330 can also be used to satisfy the European mandate for Mode S level 2 surveillance. And an antenna diversity option is added with the GTX 330D for improved air-to-air surveillance of TCAS-equipped aircraft flying above you.

Garmin GDL 88


Get ADS-B Benefits Today

  • Dual-link Universal Access Transceiver (UAT)
  • ADS-B “Out” solution for many aircraft
  • Receives subscription-free weather and datalink traffic
  • Optional SBAS/WAAS GPS
  • Approved for installation in hundreds of aircraft models

The GDL 88 is the first dual-link solution for certified aircraft that not only provides a path to ADS-B “Out” compliance for many pilots, but also brings subscription-free weather and advanced traffic display to the cockpit.

Satisfy the ADS-B Mandate

Under the NextGen air traffic management system, all aircraft in controlled airspace will need to be equipped with ADS-B “Out” technology by 2020. For those who only fly below Class A airspace (18,000 ft) and in U.S. skies, the GDL 88 offers an affordable solution to reaching compliance. And even if you fly above 18,000 ft, the GDL 88 can still give you all the benefits of ADS-B “In” data – consider pairing it with a GTX 330/33 ES transponder for a comprehensive ADS-B “In/Out” solution.

With ADS-B “Out”, the GDL 88 gathers information about your position, track and ground speed from either your existing WAAS GPS source or an optional built-in WAAS receiver. It then broadcasts this information to ADS-B ground stations over the 978 MHz Universal Access Transceiver (UAT) frequencies. This gives ATC and ADS-B “In” equipped aircraft a more precise picture of what’s happening in the sky, and allows for more safe and efficient flight routing.

Access Aviation Weather

The GDL 88 also features ADS-B “In” datalink technology that allows it to receive subscription-free Flight Information Service-Broadcast (FIS-B) weather broadcast from ADS-B ground stations on this same 978 UAT frequency. On a compatible flight display, this uplink allows you to view graphical NEXRAD radar, METARs, TAFs, SIGMETs, AIRMETs, NOTAMs, TFRs and more.

Spot Potential Traffic Threats

The GDL 88 can receive ADS-B position reports directly from other aircraft in your vicinity. Because the FAA permits ADS-B broadcasts on 2 frequencies (978 UAT and 1090 ES), the GDL 88 contains both receivers so you can see a comprehensive view of all ADS-B “Out” equipped targets. ADS-B provides the ability to provide air-to-air datalinks with other aircraft. The GDL 88 is compatible with active traffic systems and prioritizes multiple traffic inputs, removing duplicate targets by choosing the highest integrity source available.

ADS-B “In” technology also allows the GDL 88 to receive Traffic Information Service-Broadcast (TIS-B) information. On a compatible display, TIS-B allows you to view the same dynamic traffic picture that ATC ground controllers are seeing.

Take Advantage of Advanced Display Capabilities

Advanced Display Capabilities

TargetTrend™ technology (available on compatible displays) provides an easy-to-interpret picture of aircraft trajectories. When receiving ADS-B traffic information, this allows you to better predict potential conflicts. SURF technology also supports the display of ADS-B-equipped surface targets on Garmin SafeTaxi® airport diagrams – including taxiing aircraft and ground vehicles.

The advanced display capability of the GTN series avionics allows for enhanced functionality with the GDL 88. When there are several traffic targets in an area, the GTN will declutter the display by grouping the targets and showing only the one that is the highest priority. The pilot can touch a grouped target to ungroup and show all targets in the area. The GTN also allows the pilot to select any target on the display to view more detailed information including closure rate and ground speed.

Receive Traffic Alerts

You can still take advantage of the GDL 88’s ADS-B “In” traffic, even if you don’t have a compatible flight display to view the data. When installed in an aircraft without a compatible display, a visual indicator light can alert you when traffic enters your vicinity. Audible alerts tell of a target’s range, bearing and relative altitude (when available). You’ll hear this information through your cabin audio system in an ATC-like spoken format. For example, you might hear, “Traffic: 10 O’Clock, High or Low or Same Altitude, 2 miles.” In most cases, installing a GDL 88 with WAAS can provide a complete solution for ADS-B “Out” while still allowing you to receive some ADS-B “In” benefit — all with a single product.

Avoid Upgrading More Than You Have To

ADS-B requires your ADS-B “Out” source must squawk the same code as your transponder. Patent-pending technology allows the GDL 88 to be compatible with a wide range of general aviation transponders — synchronizing squawk code and ident to eliminate the need to install a dedicated UAT control panel.

Enhance Your Reception

Available antenna options allow the performance of the GDL 88 to be optimized for any type of aircraft. For optimal performance, a diversity antenna version with both top- and bottom-mounted antennas enhance the detection of traffic both above and below, and works to minimize radio blind spots caused by the wings or fuselage during aircraft maneuvering. This is especially useful in maintaining optimal reception of ADS-B weather and traffic during ground operations. A basic bottom-mount antenna version is also available as a more cost-effective alternative.

Aspen ATX200G

AtX200G-single-product-feature (1)Aspen’s ATX200G dual-band in, 978 MHz out ADS-B transceiver + GPS is a solution for aircraft that have a Mode A/C transponder (or Mode S without Extended Squitter) and no ADS-B compatible GPS installed. The ATX200G is a certified solution and is compatible with Aspen Evolution PFDs and MFDs.

System benefits:

Access to ADS-B subscription-free weather and traffic for your Aspen display.

Meeting the FAA ADS-B out mandate with this solution*:

With your existing Mode A/C transponder (or Mode S without ES) installed, plus the ATX200G, you will meet the mandate below 18,000’.

*Note: Although an unlikely combination, if your aircraft has a Mode S with ES transponder and no WAAS GPS installed, the ATX200G meets the ADS-B compatible GPS requirement. In this scenario you would meet the mandate at any altitude.

Aspen ATX200

AtX200-single-product-featureAspen’s ATX200 dual-band in, 978 MHz out ADS-B transceiver is a solution for aircraft that have a Mode A/C transponder (or Mode S without Extended Squitter) and a WAAS-enabled GPS installed. The ATX200 is a certified solution and is compatible with Aspen Evolution PFDs and MFDs.

System benefits:

Access to subscription-free ADS-B weather and traffic for your Aspen display.

Meeting the FAA ADS-B out mandate with this solution:

With your existing Mode A/C transponder (or Mode S without ES) and WAAS GPS equipment installed, plus the ATX200, you will meet the mandate below 18,000’.

Aspen ARX100

ARX100-single-product-feature-1Aspen’s ARX100 dual-band ADS-B receiver is a solution for aircraft that already have a Mode S transponder with Extended Squitter (ES) and a WAAS-enabled GPS installed. The ARX100 is a certified ADS-B weather and traffic In solution and is compatible with Aspen Evolution PFDs and MFDs.

System Benefits:

Access to ADS-B subscription-free weather and traffic for your Aspen display.

Meeting the FAA ADS-B out mandate with this solution:

With your existing Mode S with ES transponder and WAAS GPS, you meet the mandate at any altitude.

Bendix/King KT 74 Transponder

KT 74If a new transponder is on your “to-get” list, you might want to choose one that’s both relevant now and in the future. The KT 74 transponder from Bendix/King is the easiest upgrade to the popular KT 76A/C and KT 78A models, with a “plug and go” capacity. And it’s ADS-B compliant, therefore meeting all 2020 requirements. It is low-cost, easy to install and fits into your existing panel. Suiting your needs now and in the future.


  • Retrofit – “plug and play” installation
  • Low-cost solution that will offset future costs
  • Low power consumption
  • ETSO and TSO approved Mode S
  • Accurate readings with updates every few seconds
  • More efficient routing and better situational awareness
  • Meets ADS-B 2020 requirements (requires WAAS GPS source)

Download the brochure (PDF)

The ADS-B Experts

ADS-B trafficConfused by ADS-B? We can help. If you’re considering upgrading your panel with an ADS-B transceiver, talk to Cincinnati Avionics first. We will explain the requirements and find a solution that fits your airplane.

[button url=”” size=”big”]Learn More[/button]

We are the ADS-B Experts

You have questions. We have answers.

ads-b airspace requirementsBy now, you’ve probably heard of Automatic Dependent Surveillance-Broadcast (ADS-B) and the requirement for many airplanes to add an ADS-B Out transponder to the panel. But you may be confused about what exactly ADS-B is, why you should care and what you should do.

That’s where we come in. Count on Cincinnati Avionics to guide you through the process from start to finish. We’ll explain what ADS-B is all about and what it offers for pilots, so you can make a confident decision about your airplane’s avionics. We also offer a full complement of ADS-B avionics to suit almost any aircraft, from names you trust: Garmin, Appareo, Bendix/King and more.

Read our helpful resources below, and feel free to contact us anytime to talk one-on-one: call 513.735.9595 or email [email protected]

Understanding ADS-B

At heart, ADS-B is a new way for Air Traffic Control to separate airplanes, but it can also offer free datalink weather and traffic. Here are 5 things to know before you upgrade to ADS-B:

  1. ADS-B Out avionics will be required by January 1, 2020 in most airspace where you need a Mode C transponder today.
  2. An approved WAAS GPS must be included in your ADS-B Out solution.
  3. ADS-B Out compliance must be with panel-installed equipment (no portables).
  4. ADS-B In equipage (for weather and traffic) is completely optional.
  5. Avionics are available from Garmin, Bendix/King, Appareo, Aspen and others, starting under $5,000.

Want to learn more about ADS-B?

Avionics Options

In just the past 18 months, a number of exciting ADS-B products have been announced. There has never been a better time to consider upgrading your panel. Below, find some of the more popular options. Request a quote or contact us for complete pricing and information.


GDL 82 – an all-in-one solution, including WAAS GPS, that retains your existing Mode C transponder. More info


GTX 335/345 – a 1090ES transponder (ADS-B Out), with internal GPS. 345 adds ADS-B In and a Bluetooth connection for tablets. More info

Already have a GTX 330 Mode S Transponder? In most cases, this can be upgraded to ES. Contact us for details.

Appareo Systems


Stratus ESG – a 1090ES transponder with certified WAAS GPS, an “all-in-one-box” product for compliance. The Stratus portable ADS-B In receiver can be connected to Appareo’s Out transponder for an amplified ADS-B In experience on ForeFlight. Also available without GPS (Stratus ES). More info

L3 Aviation

Lynx Traffic & NEXRAD

Lynx MultiLink Surveillance Systems is a simple transponder replacement packed full of ADS-B benefits. More info

Bendix/King by Honeywell

Bendix/King KT 74

KT 74 – a 1090ES (ADS-B Out) transponder that is a “plug and play” replacement for the KT 76A/C. More info

Understanding ADS-B traffic

Many panel-mount ADS-B transponders, in addition to portable ADS-B receivers like the Garmin GDL 50 and the Appareo Stratus, can receive ADS-B traffic in addition to weather. But unlike weather, which is broadcast continuously, traffic is only transmitted in response to specific prompts. This can make ADS-B traffic very confusing–when does it work and when doesn’t it work?

To help, we’ve created this series of graphics, which shows three common scenarios:

Graphic 1: The most likely scenario, where you are flying with a portable ADS-B receiver, but do not have an ADS-B Out transponder installed in your panel. Here, you’ll receive any airplane that is transmitting ADS-B Out via air-to-air (no ground station required). Most airplanes do not have ADS-B Out, so this is fairly limited. You will not see regular, Mode C targets.

Graphic 2: In this case, you are still flying with a portable ADS-B receiver and no ADS-B Out in your airplane, but you are close to another aircraft that is ADS-B Out equipped. In this case, that ADS-B Out airplane is waking up the ground station and is receiving a custom traffic picture for a 30 mile “hockey puck” around that airplane. If you are close enough to that airplane, your portable receiver can listen in on that traffic message. While you won’t get a complete traffic picture, you will get a better one, since the ground station transmits Mode C targets in addition to ADS-B targets.

Graphic 3: This is the best possible case. You have an ADS-B Out transponder in your airplane, so you are transmitting out to the ground stations and creating your own “hockey puck” of traffic information. You’ll see all traffic within a 30 mile diameter and 3500 ft.

For more information on ADS-B and how to upgrade your airplane, visit our ADS-B page.

ADS-B 101: what you need to know

In an industry famous for its ridiculous acronyms, ADS-B stands out for being uniquely confusing. Lots of pilots use the term, but few really know what it means. And who can blame them–it’s incredibly complicated. Unlike WAAS or LORAN, you can’t even pronounce it!

So what is ADS-B? Why should you care about it? Can you just ignore it?

No. While ADS-B may be confusing, it’s probably the most important technological change you will have to deal with as a pilot over the next two decades. So it’s worth the effort to learn this new language.

ADS-B system diagram

ADS-B involves ground stations, GPS satellites and panel-installed avionics.

What is it?

At heart, ADS-B is really just a new way to manage air traffic. As such, it will eventually replace radar as Air Traffic Control’s (ATC) primary tool for separating aircraft. It’s different from radar in that it does not depend on controllers in a central location watching radar scopes. Instead, aircraft self-report their GPS position in a networked environment, so pilots can see the entire air traffic picture around them. There is also the added benefit of datalink weather and traffic available through ADS-B.

ADS-B stands for Automatic Dependent Surveillance-Broadcast. It’s a dreadful name that only an engineer could love, but it happens to be fairly descriptive. Let’s look at each part of it:

  • Automatic–properly-equipped aircraft automatically report their position, without need for a radar interrogation
  • Dependent–ADS-B depends on aircraft having an approved WAAS GPS on board and an ADS-B Out transmitter
  • Surveillance–it is a surveillance technology that allows ATC to watch airplanes move around
  • Broadcast–aircraft broadcast their position information to airplanes and ATC

This system doesn’t need radar to work properly, but it will depend on a network of ground stations to receive aircraft reports and send them back to ATC. These stations also transmit weather and traffic information back up to properly-equipped aircraft. This network currently consists of over 500 stations, and the initial phase is complete. So when you hear that ADS-B moves from a “ground-based” radar system to a “satellite-based” system, it’s only partially true.

By the way, you’ll often hear the phrase NextGen used interchangeably with ADS-B. Technically, NextGen (or the Next Generation Air Transportation System) is the FAA’s omnibus plan for modernizing air traffic control. ADS-B is a critical part of NextGen, but it’s only one part of it.

Now that we know what ADS-B is, how does it work?

Out vs. In

ADS-B is made up of two main parts: ADS-B Out and ADS-B In. Out is of interest to controllers, while In is mostly of interest to pilots.

ADS-B coverage map

ADS-B coverage is excellent above 5000 ft. AGL.

ADS-B Out is a surveillance technology for tracking aircraft–it’s what ATC needs to manage traffic. It reports your aircraft’s position, velocity and altitude once per second. This transmission is received by ATC and nearby aircraft and this data makes up the equivalent of a radar display. Most aircraft will be required to have ADS-B Out by 2020 (see below).

ADS-B In allows an aircraft to receive transmissions from ADS-B ground stations and other aircraft. This is how pilots can get subscription-free weather and traffic in the cockpit. Adding ADS-B In is strictly optional. While it offers some great benefits, the FAA is only concerned about you equipping with ADS-B Out–the free weather and traffic is simply the carrot to get you to write a check.

Note that there are various combinations of these two: Out-only equipment that simply meets the FAA requirement, In-only portable devices that receive weather, and ADS-B In/Out products that do it all. One thing to keep in mind–there is no such thing as a portable ADS-B Out device. All Out equipment must be panel-installed.

1090 vs. 978

You would think that would be the end of the confusion with ADS-B, but unfortunately you would be wrong. Due to concerns about frequency congestion (and other issues too boring to detail here), there are two different datalink technologies that meet the ADS-B requirement: 1090 MHz ES and 978 MHz UAT. As the names imply, these are simply different frequencies used by the equipment to transmit and receive data.

Garmin GTX 335

1090ES transponders like Garmin’s GTX 335 are all-in-one ADS-B Out solutions.

1090 Extended Squitter (ES) is based on 1090 MHz, just like our Mode A/C/S transponders. In fact, some Mode S transponders (like Garmin’s GTX 330) can be upgraded to an ES transponder by upgrading the software and adding a WAAS GPS. This is the only technology accepted outside the US and above 18,000 feet, so it will be popular with turbine airplanes. ES receivers can detect other aircraft with ES transmitters air-to-air, and they can receive other traffic information uplinked from ADS-B ground stations. But there is no weather datalink on 1090.

978 products are sometimes called UAT, for Universal Access Transceiver. This is only available in the US, and only below 18,000 feet, so it is aimed mostly at piston aircraft. Like a 1090 ES receiver, UATs can detect other airplanes with transmitters on the same frequency (978 MHz) air-to-air and also receive the rest of the traffic picture from ADS-B ground stations. But weather is also transmitted over 978 MHz, an added bonus.

This ends up being a real mess. You can have all kinds of different equipment: 978 Out only, 978 Out/In, 1090ES Out only and even a combined 1090ES Out/978 In. At the end of the day, you should choose the Out frequency that matches your flying. If you fly above 18,000 feet or outside the US, 1090ES is your only option. If you don’t, a 978 UAT could work. After you’ve chosen your Out frequency, the only other decision is whether you want ADS-B weather; since that’s only available on 978, that’s a simpler decision (but remember that your 978 receiver could be a portable).

Weather and Traffic

Since weather and traffic come into play so much during any discussion of ADS-B, let’s define some terms: FIS-B and TIS-B. These are the two products that we can receive via ADS-B In.

Stratus 2S

Portable ADS-B receivers like the Stratus are great for use with an iPad, but they do not meet the ADS-B Out mandate.

Flight Information Services-Broadcast (FIS-B) is just a fancy name for datalink weather. Only available with a 978 MHz receiver, the end product is very similar to what we’re used to seeing with XM Weather. NEXRAD radar, METARs, TAFs, TFRs, AIRMETs and other information is continuously updated in flight, and all this can be displayed on either a panel-mount MFD or a portable device like an iPad. There is no monthly subscription fee with FIS-B (your tax dollars paid for it), which is a nice feature. But unlike XM Weather, ADS-B weather uses the network of ground stations, not satellites. That means coverage, while pretty good now and getting a lot better, is not as universal as XM.

Traffic Information Services-Broadcast (TIS-B) is what the name suggests–datalink traffic. But leave it to the FAA to make this complicated. Unlike ADS-B weather, which is broadcast to anyone in range of the ground stations, ADS-B traffic is a custom report that is only sent to aircraft with ADS-B Out. If you’re flying with an ADS-B Out transmitter in your airplane, you’ll get an excellent picture of all traffic within roughly 30 miles of you. But if you’re not flying with an ADS-B Out transmitter (say, with a portable ADS-B In receiver), TIS-B is fairly unreliable. Read this article for complete details on this confusing subject.

Changes for ATC

Remember that, while datalink weather and traffic are nice, the whole point of ADS-B is for ATC. And the FAA has some grand plans for how ADS-B will transform the way it does business, claiming it will reduce aviation’s environmental impact, improve safety and increase capacity at airports. A lot of this seems awfully optimistic, and will not be a reality for many years (if ever).

But there are some more realistic improvements that will probably come to pass sooner. Since ADS-B is so much more accurate than radar, separation minimums can be reduced. This should lead to at least a little more direct routing and some increased capacity. Because ADS-B does not require radar, air traffic control will be available in many remote areas that cannot be served by radar. ADS-B will also impact ground operations, giving controllers the ability to prevent runway incursions and ground traffic conflicts.

But of course this won’t come free.


Final ADS-B Out rules were finalized in 2011. Those rules say that by 2020, all aircraft will be required to have ADS-B Out equipment to fly in Class A, B and C airspace, plus Class E airspace above 10,000 feet but not below 2,500 feet. You’ll also need it within the 30nm “Mode C Veil” around Class B airports. So in general you’ll need ADS-B Out most of the places you need a Mode C transponder today–and you’ll need to keep that Mode C transponder if you install 978, because radar will be the backup for ADS-B.

ADS-B airspace

ADS-B Out will be required by 2020 for flight in most controlled airspace.

That does mean some pilots will not have to upgrade to ADS-B Out. If you fly a Cub on sunny Saturdays away from major airports, you’ll be exempt. But if you use your airplane for any type of transportation flying, plan on equipping with ADS-B Out by 2020.

This ADS-B Out transmitter must be a panel-installed, certified solution (again, no portable ADS-B Out option). An approved WAAS GPS source is also required, to make sure your reported position is accurate. Remember, though, there is no mandate for ADS-B In equipment.

There are a number of products available now to satisfy this requirement, from major avionics manufacturers like Garmin, Appareo and others. Prices vary significantly, but average about $5000 (including installation).

What should I do?

This may all sound overwhelming, and the FAA certainly has made things complicated. But the end result is pretty simple: by 2020, you will most likely need to install an ADS-B Out transmitter in your panel (or upgrade your Mode S transponder if you have one). The only questions are what solution to install and when to do it.

The market for ADS-B products is pretty mature now, with features going up and prices coming down. Garmin’s GTX 335/345 announcement in early 2016 showed that the avionics giant is serious about owning the ADS-B market, but there are a number of other companies shipping ADS-B boxes of their own. Some of these are Out-only, in an attempt to check the box for 2020 compliance as cheaply as possible. Others are full-featured Out/In products that can connect to a variety of MFDs. (see all the options here)

Of course there is already a red hot market in portable ADS-B receivers, like the Stratus, Garmin GDL 50 and Dual XGPS 190. These are easy and inexpensive ways to get subscription-free weather on your iPad or portable GPS, and have become quite popular over the past year. But they do not address the 2020 mandate for ADS-B Out, and traffic is unreliable.

One option that could become more appealing is to combine these two products: install an ADS-B Out transponder in the panel, but use a portable receiver for ADS-B In. That would comply with the 2020 rule at a fairly low cost, but give you complete weather and traffic datalink. The only major drawback here is that your weather and traffic would not be displayed on the panel, but rather on an iPad or other portable device. And remember that you’ll need an approved GPS source for your ADS-B Out box–either a WAAS GPS or a GPS receiver built-in to your transponder.

When to purchase an ADS-B Out solution is pretty simple these days: soon. Certainly if your transponder quits, it’s sensible to replace it with a full ADS-B Out unit instead of spending the money on a soon-to-be-outdated Mode C transponder. If you want free in-flight weather and a reliable traffic picture, an ADS-B Out transponder is a good investment. While you certainly shouldn’t feel like you have to upgrade to ADS-B Out today, it’s probably not wise to wait until the last minute – avionics shop time may be scarce.

No matter what decision you make, it seems clear that ADS-B is coming to US airspace. In time, it might even be a good thing.

Want to learn more? Contact Cincinnati Avionics: 513.735.9595 or [email protected]